Quote:
Originally Posted by GAGEDADY
good run so close you could have had a fly fart at halftrack and it slow you that much if you get some cooler weather or pull the front sway bar (or just unbolt it) and it might do it, i hooked alot better when i took mine off. i am going to a private track rental sunday if it doesnt rain, so until i snap an axle i will try to get some #s with hoosier drs for you.
|
These Kumho’s hook well. I remember with the PS1’s I would short shift 1st, spin through 2nd while attempting to keep the car strait…shift and spin until about 70mph in 3rd then it would hook. My 60ft times were in the 2.0-2.2 range. I just couldn’t get the tires to stick…even launching at 1500rpm! My times dropped from a 11.6 to a 11.1 just with the Kumho tires. Now I get my best launches at about 2500rpm. I get a little spin then it hooks until about 4krpm and it comes loose again. So I let it spin until I hit about 50mph and shift into 2nd. I shift hard so it brakes loose but then it hooks right up.
I’ve thought about it many times about starting off in 2nd. However, I don’t want to kill the factory clutch. It’s been in the car for 16,000mi!!!
I do think part of what is hurting me is the ACR suspension. It’s much too stiff in the rear for drag racing. I don’t want to change spring because I want it to be an ACR. I should play with the shock/rebound settings a little and If I get my 60ft times into the 1.60’s that would only help.
As always guys, thanks for the Advice!