Quote:
Originally Posted by Black Moon
$600 for labor is RAPE! Should run between $250 and $350. If you change all bearings/ races etc. the labor would be around $600 but not for just a ring and oinion shim and replace. Check around.
|
You get what you pay for.
Anyone can slam dunk a gear set and differential, but who's going to spend the time to take it apart 2-10 times, pulling off the bearings, measuring the shims, calculating what needs to be changed and reinstalling them to get the footprint, preloads and backlash correct? Not the guy doing it for $200.
It's more involved than you think, and unless you've done a few hundred diff jobs, shush.
